AnyTone BT-01

This AnyTone BT-01 is a Bluetooth speaker microphone with remote control that allows you to control the AnyTone AT-D578UV amateur radio with Bluetooth. The AnyTone BT-01 has a large and clear 5cm (2.2 inch) display and a front speaker.

You can connect the AnyTone BT-01 wirelessly via Bluetooth and it has a range of approximately 10 meters. Or you choose to connect the supplied remote control cable, which has a length of 4 meters.

The AnyTone BT-01 can be charged with the included USB-C charging cable (5V USB main charger not included). When the remote control cable is connected, it will be charged automatically.

NB! Please note that previous versions of the AnyTone AT-D578UV may require a Bluetooth firmware update. The Bluetooth version of your AnyTone AT-D578UV must be at least V10043 or higher. The Bluetooth update procedure is available upon request and only for customers who purchased the AnyTone BT-01 from us.

Features AnyTone BT-01

• Suitable for
  
  
  
  • AnyTone AT-D578UV Plus
  
  
  • AnyTone AT-D578UV III PLUS
  
  
  • AnyTone AT-D578UV PRO
  
  
  • AnyTone AT-D578UV III PRO
  
  
  
  


• Volume control


• Bluetooth version: V4.2 +EDR


• Protocol: HFP / HSP / A2DP / AVRCP / SPP


• Noise reduction for TX and RX


• Program P1 - P3 programmable


• Sensitivity: -80 dBm


• Audio performance: SBC decoding


• Transmit power: Class 2/4 dbm


• Transmission distance: ± 10 meters


• Screen: LCD 2.2 inches


• Dimensions: L 109 mm x W 62 mm x H 28 mm


• Weight: 137 grams


• Accessory connector: USB C type


• Operating temperature range: -20 to 55 °C


• Speaker: 2 Watt / 8 Ohm


• Charging: 5 Volt / USB C type


• Interface: 3.5mm


• Battery: 1800 mAh / 3.7 Volt

Package contents

• 1x AnyTone BT-01


• 1x Belt clip


• 1x Remote control cable 4 meters


• 1x USB-C charging cable


• 1x Manual in multiple languages

Note:

Please note that the Bluetooth firmware of your AnyTone AT-D578UV must be V10043 or higher. Previous Bluetooth firmware versions of the AnyTone AT-D578UV need to be updated if they do not connect to the AnyTone BT-01. The Bluetooth firmware update procedure is available upon request and only for customers who purchased the AnyTone BT-01 from us.