Diamond CP-6S

The Diamond CP6S is a vertical multiband HF antenna with shortened radials for 6, 10, 15, 20, 40, 80m. Total height only 460cm, the length of the radials are approx. 180cm. Usual high-quality workmanship and easy mounting, as known from Diamond products.

The maximum load of the Diamond CP6S is 200 Watt PEP, SWR <1.5, adjustable by adjusting the lengths of the radials. Including mast clamps (30 to 62 mm) and PL connector. The radials can be installed on one side only if space requires it. The radiator of the CP-6 is DC-grounded which provides good protection against static charges and lightning strikes in the vicinity.

Attention! the variants of the 80m radial. The new "S" version contains material that allows an isolated installation of the antenna on the mast. This reduces the influence of the mast to resonance of the radials, which in turn facilitates the tuning of the radials. For the same reason, a short cable with choke is supplied.

The Diamond CP6S is a HF base antenna consisting of 6 radials, each with a length of 180cm. The total length of the Diamond CP6S is 460cm (4.6 meters). This Diamond CP6S has a maximum power of 200Watt SSB and is suitable for masts with a diameter of 30 to 62mm.

Features Diamond CP6S

• HF base antenna

• Frequency range: 3.5 / 7 / 14 / 21 / 28 / 50 MHz and 29 MHz FM
• Suitable for: 80 / 40 / 20 / 15 / 10 / 6 meters

• Antenna type: omnidirectional

• Suitable for mast diameter 30 to 62 mm

• Antenna boom made of fiber reinforced plastic to protect the internal radiator

• Supplied with coaxial cable and FME-Female connector

• Maximum power: 200 Watt (SSB)

• Impedance: 50 Ohm

• VSWR: less than 1.5:1

• Nominal wind speed: 40 m/sec.

• Self-supporting radials (elements) can be set for one direction.

• Total length: approx. 460cm

• UHF Female connector

• Weight: 4.9 kg

Package contents

• 1x Diamond CP-6S HF base antenna

• 1x Manual in English